How to Measure for a Custom Mount, Holder or Bracket
Capture the dimensions and context needed to design a custom holder around a device, surface or unusual mounting position.
Read guide ↗Custom mounts & holders
Need to Hold or Mount Something That Standard Products Don’t Fit?
A useful mount starts with two geometries: the object being held and the place it must attach. Ports, viewing angle, screw positions, cable clearance and how the object is removed all matter more than choosing a printing process first.
Projects accepted from all Tunisia. Start remotely with photos, measurements, a file or a link. In-person meetings can be arranged by appointment when useful.
Typical projects
Specific objects and outcomes—not a generic printing menu.
The examples below define the type of problem this page is meant to solve. Final feasibility depends on the actual geometry, use conditions and information supplied.
01Device wall mounts
02Under-desk holders
03Router and hub mounts
04Remote-control holders
05Sensor/camera brackets
06Custom cradles and docking supports
The real customer problem
Why someone searches for this page.
→
The standard mount blocks a port or cable.
→
The available mounting surface is unusually narrow or angled.
→
The device needs a specific viewing or operating angle.
→
A holder needs to fit a case, accessory or modified device.
→
The object needs to be removable while the mount stays fixed.
Project brief
Send the information that changes the physical result.
A useful request explains fit, dimensions and intended use. Technical manufacturing choices can then be considered in the context of the real object.
01
Device model and exact dimensions
02
Photos of the mounting location
03
Required angle/orientation
04
Mounting method available
05
Ports/buttons/cables that must remain accessible
06
Expected load and environment
Suitability note
Load-bearing, overhead, vehicle, safety-equipment or other failure-critical mounts require dedicated engineering assessment and should not be assumed suitable from a standard printed design.
FAQ
Questions people ask before starting this exact type of project.
Can you design around a device I already own?
Yes. Exact measurements, photos and the required access to ports/buttons are useful starting inputs.
Can the mount use existing screw holes?
Potentially. Provide the hole spacing, screw size and surrounding geometry so the interface can be evaluated.
Can I request a different viewing angle?
Yes. The desired orientation is part of the design brief and should be specified before the mount geometry is finalized.
Related needs
Continue by project type.
Start the real project
Tell Us What You Need to Mount
Use the file if you have it. Otherwise start with photos, measurements, references and the problem the object needs to solve.